What’s in the Box?

While things might vary based on the size of the box, everything noted here in be in all of the boxes of computers in this site that are sold through Senitrus Computers. This is important to know before receiving your box so you can make sure everything was shipped to you. It is strongly recommended that you sign up for a Senitrus ID account. You could create a local account which has no ties to an outside service including Senitrus, but the Senitrus ID will be a benefit. You get the following items:

  • Device
  • microSD Card
  • Tray Eject Tool
  • 16GB USB-C thumb. drive for Senitrus installation
  • Setup Guide

Device

Obviously, the star of the show. The computer will be what you bought everything for. The device will be a 14″ notebook, or a 16″ notebook. There will be other computers include GoogleBook PCs, and Servers. Those computers will receive different components and will not be listed here.

microSD Card

This card should install into your system before you start your computer for the first time. Simply put, it is tedious to enter the card trays. This will allow the drive to automatically mount once system is turned on. All computers will have a base storage of 64GB?, but you can upgrade to up to 2TB if you have no need for a 64GB card.

Tray Eject Tool

Because of the microSD card tray for the above card, a tray eject tool will be essential. For A and P Series computers, this tray will also be for their SIM? which requires access to that same tray.

Install USB

Let’s assume that your system got corrupted. You need to reinstall Senitrus. However, as your only computer is down, there is no way for you to download and image a thumb drive for installation. All systems contain a 16GB USB-C thumb drive for OS installation. You would keep tapping F2 until you enter the UEFI, and select the thumb drive as the boot drive. You should set up an UEFI Boot Password while you are there.

Cord

You need the cord. The cord will likely have a brick which will be where the power is connecting. All systems will plug into their respective power supply, and provides for the electricity you would need. Since notebooks have a battery, a power outage isn’t the end of the world. However, the servers should have an uninterruptible power supply to keep the server from suddenly losing power while doing something very important.

Setup Guide

There will be a setup guide. This will be a booklet to instruct you on how to set everything up, and what you would need. Everything should be relatively easy. You are using a notebook PC (except servers), and the OS? is already installed, so you don’t have to do any installing. If there is something you would need help in, then there will be tutorial videos located at the Youtube site. This will always be a https://y.senitrus.com/ URL with y being for Youtube.